02 August 2009

Its with a bit of sadeness this week. Yoda was sold and has gone off to a new home. The first of the i7's that are replacements for the quaddies has yet to be built by the shop, but they promise that it will be ready by the end of next week.

I'm off for a weeks skiing so the "farm" will be switched off, except for Maul.

Overstretched
Maul overstretched itself last week by requesting too much work. This is caused by the ReSchedule tool swapping work to the cpu, so BOINC then thinks the gpu doesn't have enough and request more. The solution is to set all the projects to No new work (NNW) so that it can finish off what its got. Its been in this mode for the last 3 days.

GPUgrid app
The GPUgrid project (which does medical research) released a new cuda 2.2 application at the end of the week. I've already had one machine lock up and had to abort the work unit in question. Maul, who would be ideal for these work units has been in NNW mode for the last 3 days so it hasn't picked up any new work or the updated application.

Seti Donation
After an on-going discussion over on the Seti message boards about the MySql log files being a point of disk contention we came up with the idea of using Solid State Disks (SSD's). These are of course fast and expensive when compared with a traditional hard disk. I made the offer of getting a couple of them for the project (Intel X25-M). I ordered 2 from a US web site with them shipping directly to the Seti@home project. They are due to be delivered on the 6th of August. Hopefully the project can put them to good use.

28 July 2009

Seti 5 million credits

I hit 5 million credits for Seti tonight. Here is my certificate. I thought i'd use a different one to normal as it has an aerial picture of the Arecibo radio telescope.




GPUgrid woes
Since the nvidia 190.38 driver came out last week, GPUgrid work has been failing on the GTX260's in Maul for all work units. The GTS250's in 4 of the quaddies work fine. This points to an incompatibility with the G200 based cards, which are the high-performance ones.

While its possible to go back to an older driver, Seti positively screams along now with GPU work units taking as little as 2 minutes when using the cuda 2.3 DLL's. If I downgrade I can't use cuda 2.3 and lose all that speed. I am hoping that the GPUgrid cuda 2.2 app, due later this week, will work properly with the current drivers. In the mean time Maul is concentrating on Einstein and Seti work.

Sale time
As mentioned in my last post Yoda is up for sale. You can see it on eBay here: http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=300333014651

Its my intention to also decommission all the other quaddies and sell them off too. This is mainly because of needing the space for the new i7's and also because of the amount of power needed to drive them. The energy bills have gone up 20% since the 1st of July due to price increases.

25 July 2009

Yoda on the chopping block

A few changes are happening over the next couple of weeks.

Quaddies for sale
Yoda is for sale on eBay. I need the room (and money).

i7's ordered
I have ordered 4 x i7 machines to replace all the quaddies. They are ASUS P6T's. In the mean time I have dropped off the 700w power supply and the GTX275 to be installed in the 1st one. If its reasonably quick i'll go with the same graphics card in all of them.

Cuda 2.3 released
Nvidia has released cuda 2.3 along with an updated driver during the week. Initial indications are that its about 30% faster than cuda 2.2.

I have upgraded 3 of the machines so far. The other two have to finish off their cuda work before I can upgrade them. Meanwhile GPUgrid are updating their app to use cuda 2.2 next week. Hopefully it won't take them too long to get to 2.3.

20 July 2009

Weekend dramas

A couple of dramas this weekend.


Trashing cuda work
I upgraded the "stock" Seti cuda app to the optimised one and stuffed up the app_info. That resulted in all my Seti cuda work being deleted. To top things off I couldn't get any new cuda work units until much later due to the Seti servers being overloaded. It took me a short while to fix the app_info problem, but much longer to get any work unit to prove it worked. Once I had it working I upgraded the remaining machines with the new app and app_info files.


Network down
After the cuda app upgrade I decided to relocate the router and the 8 port switch. So I unplugged the switch, moved it to its new location and plugged it all in. No problem the machines only use the network during my ISP's off-peak times (1am to 7am).

When I checked the following day all the machines were complaining about no network connection. After checking a few things it seems the network cable had come out the back of the file server. I swapped the cable for another one and the network came back to life. After that I manually had to allow the machines to get work as they had all run out of work.